Telescopic lifting tower. Base equipped with wheels with brakes
Telescopic lifting tower designed and certified to lift loads of up to 230 kg (507 lb) to a maximum height of 5.22 metres (17 ft)
| SPECIFICATIONS | ELC-765 |
| Maximum Height | 5.22 m I 17 ft |
| Maximum Load | 230 kg I 507 lb |
| Safety System | ASB System (Automatic Safety Blocking System) |
| Brake Winch | AL-KO 900 (900 kg) |
| Footprint: | Ø 225 cm I 7 ft 4.6 in |
| Wheels: | 4 wheels with brakes and bearings |
| Secured to the base with 4 fixing points | |
| Folded Dimensions | Height: 1.77 m I 5 ft 10 in – Base: 45 x 45 cm I 1 ft 5.7 in x 1 ft 5.7 in |
| Material | Steel |
| Complies with Standards: | EN 17206 (Replaces DIN 56950-1) DGUV 17 & 18, DGUV Rule 115-002 (Formerly BGV-C1) 2006/42/CE |
| Net Weight | 98 kg I 216 lb |
| Adaptors | Ø 55 mm I Ø 0.18 ft |
Maximum height: 5.22 m (17 ft) / Maximum load capacity: 230 kg (507 lb)
ELC-765 has two safety systems which ensure maximum reliability when raising or lowering loads.
1.- Automatic brake winch AL-KO 900 (900 kg) from the Austrian factory AL-KO:
Its auto-block system ensures the load remains at the required height; once the required height is reached, the braking mechanism retains the load when the handle is released.
2.- ASB System (Automatic Safety Blocking System).
A Rack-and-Bolt safety system with safety bolts. In the extreme case of cable breakage, the safety bolt would immediately engage with the rack, preventing the load from falling.
ELC-765 telescopic lifting towers comply with the safety requirements according to the following Standards and Regulations:
- EN 17206 (Replaces DIN 56950-1): Entertainment technology – Machinery for stages and other production areas – Safety requirements and inspections.
- DGUV 17 & 18, DGUV Rule 115-002 (Formely BGV-C1):
- DGUV Regulations 17 & 18: Accident prevention regulation. Event and production facilities for scenic presentation.
- DGUV Rule 115-02: Staging and Production Facilities for the Entertainment Industry.
- Directive 2006/42/CE on machinery that establish “Essential health and safety requirements relating to the design and construction of machinery”.
The ELC-765 lifting tower is manufactured using the most advanced welding techniques, guaranteeing the highest level of safety and strength, complying with the lightweight, sturdiness and manoeuvrability requirements needed to lift heavy loads.
The reinforced, compact base of 45 x 45 cm is fitted with four rectangular legs equipped with levelling screw-jacks with non-slip chromed steel and injected rubber discs which guarantee a perfect grip on all kinds of surfaces.
The tower is provided with four rotating wheels with brake and bearings which permit the tower to be transported more smoothly and comfortably. The wheels are fastened to the base with fastening plates, with four screws per wheel; this system ensures the best possible fastening, even in jobs where the tower must be transported over irregular surfaces.
This wind-up stand consists of four telescopic sections made in reinforced steel and finished in a textured, black, anti-scratch, powder coating (Epoxi). This finish makes the tower suitable for outdoor use, guaranteeing maximum corrosion resistance.
The masts are equipped with:
1. Oversized welded reinforced ending which strengthens the mast, with an ergonomic metal pressure knob.
2. Internal cushioning system to prevent wobbling of the mast sections when extended (on all four sides).
3. Double drawback pulley
4. Pulley protectors which reduce the chance of damage to the pulleys during handling and transportation at the same time preventing the cable from coming off the pulleys.
For a quick, safe and effortless lifting process, ELC-765 telescopic towers are equipped with an Ref. AL-KO 900 (900 Kg) hand winch with automatic braking system, which stops and holds the load at the desired height: once you have reached the desired height, on letting go of the winch handle the braking system automatically engages and holds the load in place.
The mast sections are extended by means of a set of pulleys with bearings and a galvanised steel wire rope with steel core (Composition: 7×19+0), specially manufactured for lifting heavy loads.
It is provided with a spirit level, for a proper vertical adjustment of the telescopic masts and levelling of the tower.
The ELC-765 towers are equipped with a handle and four swivel wheels with brake and bearings to make handling and transporting it easy.
During transport, the four legs are kept in the storage cassettes and secured there with a knob and plate to avoid marking them.
The winch handle can be removed to make the ELC-765 more compact and easier to transport and store.
GUIL – Technical Specifications – ELC-765
GUIL ELC-765 Lifting Towers Certificate
DETAILS & COMPONENTS THAT MAKE THE DIFFERENCE
Ref. ELC-765
Telescopic lifting tower specially certified to lift loads of up to 230 kg (507 lb) to a maximum height of 5.22 metres (17 ft).
- ASB System (Automatic Safety Blocking System)
- Zip/trigger safety system. Self-lubricating pulleys. Special Epoxi anti-scratch paint finish (for outdoor use).
- Internal system to prevent wobbling of the tower
- Rectangular legs with chromed foot plates with non-slip injection moulded rubber pads. Spirit level (for correct vertical adjustment)
- Special non-rotating steel wire rope, with steel core, 3 times the strength required. Top section fitted with a reinforcing ferrule.
- Auto-brake Winches (AL-KO) Comply with CE Machinery Directives.
ADAPTORS
RELATED PRODUCTS
| Maximum Height | 5.22 m |
|---|---|
| Maximum Load | 270 Kg |
| Height stowed | 1.77 m |
| Maximum Height | 5.22 m |
|---|---|
| Maximum Load | 300 Kg |
| Height stowed | 1.77 m |
| Maximum Height | 4.50 m |
|---|---|
| Maximum Load | 150 Kg |
| Height stowed | 1.53 m |
| Maximum Height | 5.40 m |
|---|---|
| Maximum Load | 150 Kg |
| Height stowed | 1.82 m |
| Maximum Height | 5.15 m |
|---|---|
| Maximum Load | 250 Kg |
| Height stowed | 1.70 m |
| Maximum Height | 6.30 m |
|---|---|
| Maximum Load | 220 Kg |
| Height stowed | 1.70 m |
CHOOSE YOUR LIFTING TOWER
Choose from over 50 models
GUIL – MANUFACTURING LIFTING TOWERS SINCE 1983
We only use the highest quality components for our towers, which guarantees MAXIMUM DURABILITY
SOMETHING ELSE FOR YOUR EVENTS
Start and finish-line arches & Frames for Advertising
Special sizes and shapes available
Retractable belt queue barriers, extendable tape stanchions, braided rope barrier posts
