Its four detachable stabiliser legs, manufactured with reinforced steel, come complete with leveller screw jacks that have reinforced nylon injection moulded spin handles (ergonomic design) with double thread and speed which facilitates the levelling task. Their non-slip foot plates ensure a perfect adjustment of the tower to the floor surface.

The Lifting Tower consists of extruded aluminium mast sections (Alloy: EN-AW 6082 T6). These sturdy sections are extended by means of pulleys with ball bearing and a non-rotating Ø6 mm galvanised steel wire rope with steel core (Construction: 7×19+0), specially manufactured for lifting heavy loads (DIN 3060). The mast sections are secured to the base with a “U” shaped steel plate which is larger and thicker than most.

ULK 600XL Lifting towers are fitted with detachable 650 x 60 x 60 mm steel forks and have a loading height of 30 cm from the floor which makes its loading effortless. (Comes with magnetic locking bolts for a quick set-up)

The forks have three fundamental features:

– Special reversible design; to be able to set them at two different heights, gaining more height when fully extended.
– Adjustable design; to accommodate different load sizes.
– The forks can be removed; for a more convenient transporting and storage of the tower.

To ease its horizontal movement and its loading in vehicles, the ULK Towers have four heavy-duty wheels (Ø 150 mm): two of them placed in the base and another two under the brake winch which also protect the winch against damage.