Adaptor for
marquee assembly
The ADT-100 adaptor is designed to make marquee assembly as quick and effortless as possible. Helps you to save time and effort in assembling a marquee.
Unique in its field: GUIL have designed and manufactured the ADT-100 in response to customer demand. We are the first manufacturer to offer an adaptor intended specifically for the assembly of marquees.
Save time in your set-ups: One end of the assembled roof of the marquee is placed on the cradle of the adaptor, and raised to a height that permits the first column section to be installed at the corners. The same procedure is then applied at the other end of the roof, and the process is repeated until all the column sections are added, and the marquee is at its desired height. If there are additional columns at other points on the roof perimeter, these sections are added after each set of corner column sections has been fitted, before lifting the roof again.
Telescopic design: The ADT-100, manufactured in steel, with powder paint finish, has three length settings (90, 135 and 142 cm), allowing it to be lowered to lift the marquee roof from ground level, and then be raised to reach the maximum height required for each marquee. The adjustable section is fixed in place by means of a metallic ergonomic knob.
Quick and easy set-up: The preparation of any party, wedding, or other function or event is much easier and quicker using the adaptor for marquees ref. ADT-100. As the roof is raised, the column sections are added at ground level, which eliminates the need for ladders for this task.
For use with: The ADT-100 is designed for use with the lifting tower ref. ELC-730/R, as the lifter will need to move as the marquee roof rises, and for this the wheels are essential. The ELC-730/R is a lifter with wheels in all four legs, as well as on the base, which makes it ideal for many jobs where mobility while working is key. Our ELC-730/R, with a compact design, has a maximum load capacity of 125 kg at a maximum height of 4.58 meters.
SPECIFICATIONS
> Adjustable length: 90 – 135 – 142 cm
> Suitable for Towers Ref. ELC-730/R
> Cradle length: 160 mm
> Colour: Black
> Material: Steel
> Net weight: 4.5 kg
![CE-Separación-OFICIAL CE-Separación-OFICIAL](https://guil.es/lifters/wp-content/uploads/2023/10/CE-Separacion-OFICIAL-1-50x38.png)
MULTIPLE APPLICATIONS
Thanks to the wide range of models, adaptors and accessories, our lifting towers are used in many fields, and are acknowledged worldwide for their high quality and durability.