GUIL LIFTERS – THE ULTIMATE SOLUTION TO INSTALL AWNINGS, PERGOLAS, SUN-ROOMS,…

The parts of awnings, pergolas, sun-rooms, etc, aren’t usually the heaviest items in the world, but their length can often make them difficult to handle and position.  Several people are required to do this work, with two people holding the item in place while a third – and perhaps even a fourth – fix it in place.  With the wide variety of lifting devices that GUIL manufacture, you can find the model that will allow you to do the work more quickly and efficiently.

  • Lifting towers for Awning installations

  • Towers for assembling Marquees

  • Lifters for assembling Pergolas

  • Towers for assembling Porches

EFFICIENCY & PRODUCTIVITY

EFFICIENCY & PRODUCTIVITY

Awnings can be a complication before you even get to the workplace: taking a 4- or 5-metre awning up the stairs is almost impossible.  But with a GUIL lifter, you can lift the awning from the ground straight to the balcony where it will be installed.

Once all your material is ready and awaiting assembly, your GUIL lifter will lift your awning, or pergola or sun-room beam, to the height where you need it, and hold it there while you fasten it in place from the comfort of your step-ladder.  No sweating to lift the part by hand, just wind the winch and let the lifter take the strain.  With GUIL, your work is quicker and more productive.

SAFETY & QUALITY

It’s not just quicker with GUIL lifters: it’s safer, too.  Our devices minimise risks at work, doing the lifting and holding work in awning and pergola assembly that would otherwise be done by hand while climbing a ladder.  By using GUIL, you are protecting everybody involved in the installation.

The reliability and safety of our lifters is ensured by components such as the auto-brake winch, emergency mast brake, and GUIL’s own mast unblocking system, which prevent workers near the load suffering any harm even in the unlikely event of the cable breaking.

SAFETY & QUALITY

LIGHT & COMPACT

LIGHT & COMPACT

A GUIL lifter can be set up in reduced spaces, allowing you to use it in places where other lifters are too large to set up, or cannot even be taken to.  Many balconies or terraces have tight corners where the lifter must stand when assembling an awning or sun-room, and GUIL will allow you to work there more easily.

The lifters are also easy to transport in a van, due to their compact dimensions, and setting up a TORO machine as a counterbalance lifter will allow it to be taken to the edge of a platform to lift the beams and other items for a pergola or sun-room.

WIDE RANGE

Awning and pergola installation can require any of our 30 models of lifter, from the ELC-700, able to lift 85 kg to 3.30 m, to the TORO D range, which can almost all lift over 400 kg to a maximum height of up to 8 m.  Many professionals have at least two models, one (an ELC-720, for example) for smaller jobs and another (such as a TORO B-202/C), which allows the load for more substantial projects to be lifted from floor level.

The wide assortment of adaptors offered by GUIL will enable you to look through and decide which of them will most closely correspond to your needs, in both the ELC and the TORO series.  With so much to choose from, you’re sure to find just what you’re looking for.

WIDE RANGE